Product ID:D-70 DEVELOPER
MSDS Date:10/08/1986
FSC:6850
NIIN:01-265-2743
MSDS Number: BGTBG

MET-L-CHEK COMPANY

1639 EUCLID STREET
SANTA MONICA, CA 90404-3770
US

Emergency Phone: 213-450-1111

Info Phone: 213-450-1111

Cage: 98733

MET-L-CHEK COMPANY

00000 SANTA MONICA, CA 90404 US

Telephone: 310-450-1111/FAX 310452-4046

Cage: 98733

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:PER MANUFACTURER,MAY CAUSE SLIGHT
IRRITATION TO SKIN ON CONTACT AND RESPIRATORY TRACT SYSTEM.
Explanation of Carcinogenicity:CARCINOGENICITY OF THE PRODUCT FOR OSHA
REQUIREMENTS IS SPECIFIED "YES" BY THE MFR,BUT DID NOT SPECIFIED
THE COMPONENT.
Effects of Overexposure:EYES:PRESUMED NON-IRRITATING;SKIN:SLIGHT
IRRITATION ON LIQUID CONTACT;INHALATION:VAPORS OR OIL MIST MAY
CAUSE MILD IRRITATION OF UPPER RESPIRATORY TRACT;INGESTION:NOT
KNOWN TO MANUFACTURER.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid:EYES:FLUSH WITH WATER.GET MEDICAL HELP IF IRRITATION OCCURS
OR PERSISTS; SKIN:FLUSH WITH WATER.WASH WITH WATER & SOAP.GET MED
ATTN FOR PERSISTING IRRITATION; INHALATION:REMOVE TO FRESH
AIR.PROVIDE OXY GEN IF BREATHING IS DIFFICULT,GET MED ATTN IF
NEEDED; INGESTION:INDUCE VOMITING. GET MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:53F (11.6C)
Lower Limits:2
Upper Limits:12
Extinguishing Media:WATER FOG,DRY CHEMICAL,CARBON DIOXIDE OR FOAM; DO
NOT USE DIRECT STREAM OF WATER.
Fire Fighting Procedures:IN CONFINED AREA,DO NOT ENTER WITHOUT A FULL
BUNKER GEAR INCLUDING A POSITIVE PRESSURE NIOSH APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:EXPOSED CONTAINERS MAY RUPTURE OR EXPLODE
IN HEAT OF FIRE DUE TO BUILDUP IN VAPOR PRESSURE.

Spill Release Procedures:ELIM IGNITION SOURCES.WEAR APPROPRIATE
PROTECTIVE CLOTHING & RESPIRATOR.DIKE & TRANSFER LIQ TO A SALVAGE
TANK.SOAK UP RESIDUE WITH ABSORBENT CLAY,SAND OR OTHR MATL.PLACE
RAGS & ABSORBED WASTE MATERL I N COVERED NON-LEAKING CONTAINERS.

Handling and Storage Precautions:KEEP AWAY FROM HEAT/IGNITION
SOURCES.STORE IN DRY,COOL & VENTILATED LOCATION.DO NOT STORE NEAR
OXIDIZING MATERIAL.AVOID PHYSICAL DAMAGE TO CANS.
Other Precautions:MINIMIZE SKIN CONTACT.

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR IF EXPOSURE
EXCEEDS TLV LIMITS.
Ventilation:PER MFR,EXPLOSION PROOF TO MAINTAIN TLV.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:GOGGLES.
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE
EATING,DRINKING,SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NSN FOR TYPE II,FORM D DEVELOPER OF MIL-I-25135D;QPL-25135-15 SPECIFIED
THAT 3 DEVELOPERS ARE QUALIFIED DEVELOPER UNDER TYPE II,FORM D OF
MET-L-CHEK COMPANY;THE MFR MAY SUPPLY ONE OF THE FOLLOWING:(1)
D-70, (2) D-701, OR (3) D-703 DEVELOPER.THIS ENTRY IS OF D-70
DEVELOPER.THIS PRODUCT IS NOT ALLOWED IN AEROSOL CANS.

HCC:F2
Boiling Pt:=82.2C, 180.F
Vapor Pres:33@68F
Vapor Density:2.1
Spec Gravity:0.8
Evaporation Rate & Reference:1.4(BUTYL ACETATE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE,MILKY SUSPENSION,MILD ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE & OTHER UNIDENTIFIED
ORGANIC COMPOUNDS.

Waste Disposal Methods:DISPOSE OF AS EPA HAZARDOUS WASTE
#D001,IGNITABLE WASTE.PLACE WASTE MATERIAL IN AN APPROPRIATE
DISPOSAL FACILITY, OR DISPOSE OF IN COMPLIANCE WITH FEDERAL,STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.